Before & After Pictures

The pictures below illustrate the drastic difference with no DMD Glare Guard installed (left picture), and the result after installing our DMD Glare Guard (right picture).

DMD Reflection	DMD Glare Guard and no reflection!

Installation
The angled ledge at the bottom of the DMD Glare Guard simply slides under the black trim at the end of your playfield glass closest to the back box where the Dot Matrix Display (DMD) is usually mounted.  The glass does not typically need to be removed, nor does the back box need to be removed to slip the angular ledge of the DMD Glare Guard under the plastic trim.

For cases where the plastic trim is tight with the playfield glass (an uncommon occurrence), simply start one corner of the DMD Glare Guard under the plastic trim and then begin pushing the rest of the DMD Glare Guard under the plastic trim as you move towards the other end of the DMD Glare Guard.  Once you try this, you will see how simple the installation can be on any DMD Pinball game.

The picture below shows the DMD Glare Guard installed on a Medieval Madness Pinball game.  Note how the ledge of the DMD Glare Guard is under the plastic trim at the end of the playfield glass closest to the Dot Matrix Display.  The DMD can still be easily viewed, but the reflections on the playfield glass are eliminated!

Pricing & Shipping

Click here to order your DMD Glare Guards now!